Ejector rod revolver. Single-Action Revolvers

Discussion in 'api' started by Kazihn , Thursday, February 24, 2022 6:09:39 AM.

  1. Viran

    Viran

    Messages:
    21
    Likes Received:
    6
    Trophy Points:
    2
    Find all posts by Hearsedriver. I go back with a brush with another dab of gun gel for good measure and do a half-dozen passes, then run dry patches through to get things clean for inspection. The primer explodes, igniting the propellant. Our basic testing procedure was as follows: Place brass in the cylinder, Depress the ejector rod to raise the brass to the fullest extent possible, Measure and record the gap between the face of the cylinder and the inside rim of the brass the distance the ejector actually moved the brass This testing procedure was something of a three-handed operation, and there is certainly some margin for error. Or Does it? The ejector rod is fully enclosed in a recess integral with the barrel.
    How Revolvers Work - Ejector rod revolver. Much Ado About Ejector Rod Length
     
  2. Kigadal

    Kigadal

    Messages:
    723
    Likes Received:
    26
    Trophy Points:
    7
    The term "hand ejector" (though not the design itself) was originated by Smith & Wesson to differentiate this class of revolver from the "top break" design, in.It is also VERY important that in doing so, anu unburned powder particles will fall out of the gun with the brass, so they cannot be deposited under the extractor.
     
  3. Femuro

    Femuro

    Messages:
    754
    Likes Received:
    13
    Trophy Points:
    4
    4. KEEPING FINGERS AWAY FROM TRIGGER, align chamber as shown in Figure 8 and push ejector rod, (located under the barrel) backwards through.The ejector components are made of stainless steel for outstanding durability and longevity.
     
  4. Voodootaur

    Voodootaur

    Messages:
    817
    Likes Received:
    27
    Trophy Points:
    1
    When reloading a revolver, the first step is to get empty brass out of the cylinder to make way for new cartridges. This is typically.I broke a General Electric walkie talkie over a fellows jaw once.
     
  5. Yozshuzragore

    Yozshuzragore

    Messages:
    593
    Likes Received:
    11
    Trophy Points:
    0
    With the revolver held vertically, depress the ejector rod with your index finger to discard expended rounds. Going off: off-hand skills that will help you.References in periodicals archive?
     
  6. Maujind

    Maujind

    Messages:
    811
    Likes Received:
    23
    Trophy Points:
    0
    It is almost impossible to find replacement parts for any old revolver. I messed my ejector rod up on my 's security six.Visit DCWilson photo album.
     
  7. Zulkit

    Zulkit

    Messages:
    642
    Likes Received:
    27
    Trophy Points:
    7
    Ruger Security Six Revolver Ejector Rod forum? This replaces Colt part number It is a 6x36 thread as per blueprint. Keep in mind, Colt threads ARE NOT CONSISTENT. We have a lot of experience.Visit old bear photo album.
     
  8. Sazahn

    Sazahn

    Messages:
    27
    Likes Received:
    17
    Trophy Points:
    2
    38 Revolver Ejector Rod. You will get one similar to the one in the photos, hand selected and inspected. A L L 1 0 0 %25 U. S. M I L I T A R Y O R I G I N A L!The time now is AM.
     
  9. Bacage

    Bacage

    Messages:
    69
    Likes Received:
    7
    Trophy Points:
    2
    What you are going to do is use that hand holding the cylinder as a slip clutch, so let it slip once the ejector rod is tight. If you find it.In double-action revolversthe shooter can either pull the trigger to cock and fire or pull the hammer back ahead of time.
     
  10. Mazuzilkree

    Mazuzilkree

    Messages:
    280
    Likes Received:
    10
    Trophy Points:
    6
    I came across this nice Pinfire revolver. Sadly the common thing found probably in all I came across is ejector rod housed in some kind of.Try Our Crossword Puzzles!
     
  11. Samushicage

    Samushicage

    Messages:
    48
    Likes Received:
    25
    Trophy Points:
    7
    Unloading A Double-Action Revolver With your right hand, push down on the top of the ejector rod to expel the remaining shells (you may actually need to.Find all threads started by kudzu3.
     
  12. Tojagal

    Tojagal

    Messages:
    244
    Likes Received:
    23
    Trophy Points:
    2
    To reload the gun, the shooter swings the cylinder out and pushes on the ejector rod to operate the extractor in the middle of the cylinder.To ensure positive ejection I have to rely on some other things.
     
  13. Sataur

    Sataur

    Messages:
    169
    Likes Received:
    28
    Trophy Points:
    1
    ejector rod forum? Yesterday I was watching a gunsmith friend attempting to remove the ejector rod off my S&W 38 Special stub nose revolver.Find all threads started by Tyrod.
     
  14. Dogrel

    Dogrel

    Messages:
    636
    Likes Received:
    6
    Trophy Points:
    2
    The shroud protects the ejector rod from damage. If the rod gets bent, the revolver will not function. Back in the old days in Texas (s.Last edited by Cooter Brown; at AM.
     
  15. Samuhn

    Samuhn

    Messages:
    353
    Likes Received:
    13
    Trophy Points:
    3
    Animation: Parts of a Double-Action Revolver. Handguns (revolvers and pistols) are short-barreled firearms sometimes used for hunting. Below are the parts.The ejector components are made of stainless steel for outstanding durability and longevity.
     
  16. Toll

    Toll

    Messages:
    940
    Likes Received:
    19
    Trophy Points:
    2
    The Samson Enhanced Ejector Rod instantly upgrades your Ruger® Wrangler® or New Model Single-Six® LR single action revolver. With a larger button.The above instructions assume that the hammer is initially all the way down de-cocked.Forum Ejector rod revolver
     
  17. Feramar

    Feramar

    Messages:
    10
    Likes Received:
    11
    Trophy Points:
    1
    Disassembling S&W cylinder is now a 1 minute task (or less). No damage to the ejector rod. High quality product Easy to set up.This is illustrative of a common phenomenon however, and not unique to the Colt or the Kimber.
     
  18. Gardashakar

    Gardashakar

    Messages:
    251
    Likes Received:
    12
    Trophy Points:
    6
    Most all double-action revolvers kick out all the empties with a stroke of the ejector rod, or in the case of top-break revolvers like the Webley models.While a hung piece of brass can easily be stripped away, clearing brass under the star requires a much more involved remedial action.
     
  19. Nicage

    Nicage

    Messages:
    979
    Likes Received:
    7
    Trophy Points:
    6
    To the front of the chamber (located below the barrel), an ejection rod is used to eject fired cartridge cases from the cylinder. Some single-action revolvers.Originally Posted by REM
     
  20. Kigal

    Kigal

    Messages:
    823
    Likes Received:
    23
    Trophy Points:
    5
    Power Custom Revolver Extractor Rod Removal Tool forum? So yeah, I think it's cool.
     
  21. Maukus

    Maukus

    Messages:
    618
    Likes Received:
    17
    Trophy Points:
    0
    Find all threads started by Tyrod.
    Ejector rod revolver.
     
  22. Kern

    Kern

    Messages:
    732
    Likes Received:
    26
    Trophy Points:
    0
    Find all posts by Memphis.
     
  23. Zulugami

    Zulugami

    Messages:
    191
    Likes Received:
    13
    Trophy Points:
    5
    Usually, only the city police wore uniforms and carried batons on their belt.
     
  24. Arazil

    Arazil

    Messages:
    755
    Likes Received:
    22
    Trophy Points:
    6
    Barnes and Co.
     
  25. Voodooramar

    Voodooramar

    Messages:
    807
    Likes Received:
    3
    Trophy Points:
    5
    Brass under the star is possible even with a middling-length ejector rod.
     
  26. Bajar

    Bajar

    Messages:
    578
    Likes Received:
    23
    Trophy Points:
    1
    forum? I also would strongly suggest not using Locktite.
    Ejector rod revolver.
     
  27. JoJozilkree

    JoJozilkree

    Messages:
    916
    Likes Received:
    6
    Trophy Points:
    4
    Visit stu1ritter photo album.
     
  28. Daiktilar

    Daiktilar

    Messages:
    43
    Likes Received:
    11
    Trophy Points:
    7
    Nickel-plated brass is smoother than naked brass, and in my experience seems to eject a bit more smoothly.
     
  29. Akinot

    Akinot

    Messages:
    689
    Likes Received:
    27
    Trophy Points:
    3
    Find all posts by tomcatt
    Ejector rod revolver.
     
  30. Yozshukasa

    Yozshukasa

    Messages:
    159
    Likes Received:
    11
    Trophy Points:
    4
    Seems like what you brought up — and Mr.
     
  31. Tygolrajas

    Tygolrajas

    Messages:
    568
    Likes Received:
    13
    Trophy Points:
    1
    Find all threads started by SgtLumpy.
     
  32. Brat

    Brat

    Messages:
    600
    Likes Received:
    3
    Trophy Points:
    5
    User Name.
     
  33. Gulrajas

    Gulrajas

    Messages:
    269
    Likes Received:
    22
    Trophy Points:
    4
    I think it is at least in part a taming mechanism to control recoil or muzzle flip.
     
  34. Tucage

    Tucage

    Messages:
    359
    Likes Received:
    26
    Trophy Points:
    1
    The spring throws the hammer forward so it hits the primer.
     
  35. Maurn

    Maurn

    Messages:
    698
    Likes Received:
    10
    Trophy Points:
    5
    Visit Wyatt Burp photo album.
     
  36. Toll

    Toll

    Messages:
    294
    Likes Received:
    16
    Trophy Points:
    2
    I measured the ejector rod throws of a few of my guns and became intrigued by the results.
     
  37. Kimi

    Kimi

    Messages:
    123
    Likes Received:
    15
    Trophy Points:
    3
    Become a Patron!
     
  38. JoJora

    JoJora

    Messages:
    609
    Likes Received:
    31
    Trophy Points:
    4
    It still functioned as designed, but it caused my OCD to go into overdrive.
    Ejector rod revolver.
     
  39. Zulurisar

    Zulurisar

    Messages:
    7
    Likes Received:
    20
    Trophy Points:
    1
    I too am NOT a Locktite fan in regard firearms.
     
  40. Maudal

    Maudal

    Messages:
    151
    Likes Received:
    4
    Trophy Points:
    7
    With a.
     
  41. Moogumi

    Moogumi

    Messages:
    633
    Likes Received:
    3
    Trophy Points:
    0
    The Ruger GP balances better for me with the full underlug than does the M
     
  42. Gatilar

    Gatilar

    Messages:
    131
    Likes Received:
    8
    Trophy Points:
    2
    Two hands are necessary — one to depress the ejector rod and one to remove the brass — and the process takes an unacceptably long time.
     
  43. Akizahn

    Akizahn

    Messages:
    686
    Likes Received:
    9
    Trophy Points:
    7
    No ejector rod shroud.
     
  44. Mozil

    Mozil

    Messages:
    47
    Likes Received:
    12
    Trophy Points:
    0
    Their respective throws, however…not so much.
     
  45. Faulabar

    Faulabar

    Messages:
    591
    Likes Received:
    20
    Trophy Points:
    2
    Start by filling the cylinder with fired casings to protect the extractor star.
     

Link Thread

  • Delhi me gangwar

    Jucage , Monday, March 7, 2022 6:49:23 AM
    Replies:
    21
    Views:
    4086
    Mezikasa
    Friday, March 4, 2022 10:44:06 AM
  • Coc upgrade chart

    Faukasa , Monday, March 14, 2022 12:18:44 PM
    Replies:
    5
    Views:
    1496
    Yokazahn
    Monday, March 7, 2022 11:58:55 PM
  • Vehicle make and model database free

    Kigaktilar , Wednesday, March 2, 2022 11:40:37 PM
    Replies:
    20
    Views:
    3080
    Zulkitaur
    Saturday, February 26, 2022 5:07:56 PM
  • Srtp kdf

    Gardanos , Sunday, March 13, 2022 4:09:23 PM
    Replies:
    7
    Views:
    227
    Gardalar
    Saturday, March 12, 2022 11:45:24 AM